ESPP-MIT1 Transmitter3

ESPP-MIT1 Transmitter

Key Attributes
Pressure Type Gauge
Pressure Range Up to 1000bar
Power Supply +8V … +28V
Total Error < ±1.0%FS
Operating Temperature -40oC …+125oC
Compensation Temperature -10oC …+80oC
Output Calibrated Pressure
Output Interface 4-20mA, 0.5V-4.5V, 1-5V, 0-5V
Overpressure Tolerance Up to 5x
Media Compatibility Gases, Liquids
Material Stainless Steel 17-4PH
Connection Type M12, ISO4400, Cable, Packard
Process Interface G1/2″, G1/4″, 1/2″NPT, 1/4″NPT, …
Dimensions   Height: 66.5mm | diameter Ø23.5mm


ES Systems has developed a series of strain gauge pressure transmitters featuring very good accuracy at a low cost. Each module is based on an all-welded hermetically sealed structure in a single stainless-steel piece. The ESPP-MIT1 is a medium isolated pressure sensor suitable for gas or fluid pressure measurements in harsh industrial or HVAC environments.

The output is fully calibrated and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. Thus, the transducer is ready to be installed directly to the end-user system without further processing.

ESPP-MIT1 comes with a variety of electrical interfaces output signal types and process interfaces. It is one of the most cost-effective solutions especially when high volumes are required.



– Excellent performance

– Very low cost

– Micro-fused technology

– Compact structure

– Integrated fully sealed stainless steel construction

– Calibrated & temperature compensated output

– Wide range of process interfaces

– Certified (CE) – included in price


Industrial Applications


ESPP-MIT1 transmitter is designed but not limited to usage on the following industrial applications: Central air conditioning control systems, Engineering machinery, Energy & water treatment systems, Hydraulic & pneumatic systems, Industrial process control & automatic detection systems, Pumps & compressors and Refrigeration systems.