彥遠有限公司

DS3075 NT-CO-PL1000 Carbon Monoxide 一氧化碳

Thu, 22 Jul 2021 11:20:55 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-CO-PL1000 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Carbon Monoxide in a variety of gas detection applications. Exhibiting high performance with excellent stability and output signal, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage. Detection Ranges :Range: 0-1000 ppm70 nA/ppm -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivitrtable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

GSS 超低功耗CO2感測器 CozIR

Fri, 26 Mar 2021 15:19:27 +0800

GSS NDIR CO2傳感器的CozIR系列是由Gas Sensing Solutions的工程師專業設計的，並且考慮到了低功耗應用。專有的LED技術比典型的紅外二氧化碳傳感器具有更低的功耗，從而使電池供電的應用持續更長時間。該傳感器系列的典型功耗僅為3mW，而用戶定義的CozIR-Blink則可低至1μW。NDIR CO2傳感器的CozIR系列推薦給希望測量低（環境）CO2水平的客戶。每個傳感器的訂購範圍為0-2000ppm，0-5000ppm和0-1％，具體取決於您的應用要求。CozIR CO2傳感器適用於采暖，通風和空調（HVAC），環境監測，按需控制的通風（DCV）和室內空氣質量（IAQ）。其他應用包括食品包裝和園藝。該系列產品還可以與手持式，便攜式或可穿戴式系統結合使用，產品使用壽命超過15年。CozIR系列目前包含4個傳感器-CozIR-Blink，CozIR-LP2，CozIR-LP和CozIR-A。在每個產品類別中，標準都有多種變體，並提供多種可定制選項，以確保每個傳感器都滿足客戶的需求。

GSS 高速二氧化碳传感器 SprintIR

Fri, 26 Mar 2021 15:36:08 +0800

GSS SprintIR系列CO2傳感器專為需要超快速，重複測量的應用而設計。 GSS內部工程團隊開發了一系列傳感器，每秒可讀取20至50個讀數，並可訂購0-5％，0-20％，0-60％和0-100的測量範圍％，取決於客戶的要求。為了使二氧化碳傳感器的SprintIR範圍與眾不同，已經對軟件和硬件進行了修改，以使SprintIR範圍能夠記錄這些大容量讀數。也無需犧牲速度與功率。 SprintIR系列提供的電量足夠低，可以通過電池供電。多種功能使您的應用程序可以集成到手持式，便攜式或可穿戴式系統中-為高速傳感應用程序和設備提供轉換結果。GSS向那些對高速和精確讀數都要求很高的應用（例如醫療保健或食品包裝）高度重視的客戶推薦SprintIR系列二氧化碳傳感器。SprintIR系列當前包含3個傳感器-SprintIR-R，SprintIR-6S和SprintIR-W。在每個產品類別中，標準都有多種變體，並提供多種可定制選項，以確保每個傳感器都滿足客戶的需求。

GSS 堅固的CO2傳感器 ExplorIR

Fri, 26 Mar 2021 15:41:33 +0800

ExplorIR系列CO2傳感器可承受惡劣條件，同時仍保持低功耗。 GSS使用固態技術來確保這些堅固的傳感器能夠承受極端的壓力，溫度和相對濕度變化，並具有抗振動和衝擊的能力。這允許傳感器在不穩定的環境中提供準確的讀數。ExplorIR系列傳感器推薦給希望測量二氧化碳含量高低的客戶。根據應用的要求，每個傳感器的訂購範圍為0-5％，0-20％，0-60％和0-100％。ExplorIR系列的CO2傳感器已被廣泛用於各種應用中。我們的潛水和太空案例研究著眼於這些傳感器在比典型環境更少的情況下的性能。這些傳感器還用於工業安全應用以及農業和食品運輸中。強大的ExplorIR系列具有多種功能，可用於手持式，便攜式或可穿戴設備中。這為具有挑戰性的環境中的應用程序提供了令人興奮的機會。ExplorIR系列當前包含2個傳感器-ExplorIR-M和ExplorIR-W。在每個產品類別中，標準都有多種變體，並提供多種可定制選項，以確保每個傳感器都滿足客戶的需求。

H2 Oxi-cat NEO305 1kW

Tue, 25 Jun 2024 15:38:29 +0800

Do you produce waste hydrogen which you simply burn without using the heat energy? Or do you want to purify helium from hydrogen or clean electrolysis gases? With our system you can burn e.g. hydrogen or other air-gas mixtures flameless in a wide concentration range and use the resulting heat energy.Typical applications of our catalysts:Catalytic, flameless, thermal combustion of H2/air-gas mixtures Combustion of hydrocarbon-gas mixtures (at increased starting temperature)Implementation of hydrogen wasteCatalytic afterburning of fuel cell exhaust gases or electrolysis gasPurification of air or e.g. heliumDepletion of oxygen or hydrogen in chemical processesGeneration of heat energy / heating energy Safety technology, explosion prevention, fire prevention through O2 administrationmax. H2-flow: 0,4 m³/hthermal power: 1 kWgastemperature at 4 Vol.-% H2: 330°C With a click on "Request" we can advise you without obligation and send you a tailor-made offer. Further technical details on the NEO305 in 1 inch tube can be found in the "Data sheet.

NEO1XXX (H2-Sensor)

Tue, 25 Jun 2024 15:38:29 +0800

The smart, simple version of our high-tech H2 concentration sensors are the sensors of the "neoOne" (neo1XXX) series. They are much more cost-effective, smaller and have only AEC-Q100 components integrated. Factory calibrated, they are ready for immediate use.Main features:Possible measuring ranges:0-5 vol.% H2 NEO10050-10 vol.% H2 NEO10100-100 vol.% H2 NEO1100Pressure range: 0.6 - 1.5 baraHumidity range: 0 - 100% r.h. (non-condensing)Temperature measuring range: -40°C - 85°C (up to 105°C for short periods).Carrier gases: air, nitrogen, oxygen depleted air possibleMeasuring signal independent of pressure, temperature and humiditySignal output via CAN 2.0 A/B with 250/500 kbpsThe gas concentration is not changed by the measurement and oxygen is not required for the measurement.

Ethanol 乙醇

Mon, 06 May 2024 16:38:21 +0800

Miniaturized infrared spectroscopy sensors dedicated to ethanol measurement.

Cranberry_CO2

Fri, 16 Dec 2022 13:52:18 +0800

Key featuresNew 1-series ultra-compact formfactor0 – 50,000 ppm measurement rangeNo False alarms due to environmental transientsFail SafeFast response time, T90

Carbon dioxide_二氧化碳

Mon, 06 May 2024 16:38:21 +0800

Miniaturized infrared spectroscopy sensors dedicated to carbon dioxide measurement.

Acetone_丙酮

Mon, 06 May 2024 16:38:21 +0800

Miniaturized infrared spectroscopy sensors dedicated to acetone gas measurement.

Methane_甲烷

Mon, 06 May 2024 16:38:21 +0800

Miniaturized infrared spectroscopy sensors dedicated to methane gas measurement.

Nitrous oxide_笑氣

Mon, 06 May 2024 16:38:21 +0800

Miniaturized infrared spectroscopy sensors dedicated to nitrous oxide gas measurement.

DS3688 – IRNET-P-20 CO2 – Combustion Analysis

Wed, 21 Jul 2021 12:33:50 +0800

NDIR gas sensor for CO2, methane, propane and other hydrocarbons detectionIRNET-P 20mm is N.E.T. IR sensor for whoever is looking for strong and dependable detection performances both at low and high volume in a standard 4-series size. The low power version (45 mA) is perfect for a portable gas detector, while the standard version fits smaller detection heads and compact detectors.IRNET-P 20mm detects CO2 or hydrocarbon gases such as propane and methane in LEL range. The 0-100%Vol range version features N.E.T. DYNAMIC technology for the highest sensing accuracy ever seen in a compact sensor. DYNAMIC sensors also provide an optional digital output for Propane detection over 0-2.1%Vol range – the best option to detect different hydrocarbons using a cross-reference factor. DYNAMIC sensors are suited for instrument manufacturers that want to design Methane and Propane detectors in compliance with the Chinese Mine standard.All N.E.T. IR sensors run on a microprocessor-based platform for internal signal processing, providing a linearized and temperature compensated output in digital and analogue format – the ideal solution for instrument manufacturers, even without any specialist knowledge in IR technology.Advantages of our IRNET-P 20mm NDIR sensors:• SIL2 rated, for certified dependability (fail-safe detection)• Individual calibration and testing, for measurements you can trust• Extended temperature range (-40 to +60 °C), for use in any environment• Internal microprocessor, for advanced signal processing• Standard industrial size, to fit existing detectors• Fast T90 response time, for critical and life-saving applications• ModBus or P2P digital communication, for ease of integration• Solid, rugged construction with stainless steel enclosure• Signal versatility: voltage and optional bridge or pellistor output• Patented, longer optical path for better resolution and stability• Standard industrial accepted negative or positive pinout

DS3707 – IRNET-P-20 – Propane (C3H8) 丙烷

Wed, 21 Jul 2021 12:36:35 +0800

DS3692 – IRNEX-P-20 – Propane (C3H8) 丙烷

Thu, 22 Jul 2021 16:05:22 +0800

IRNEX-PATEX & IECEx certified NDIR gas sensor for CO2, methane, propane and other hydrocarbonsIRNET-P 20mm is N.E.T. solution for whoever is looking for an ATEX or IECEx certified IR sensor with strong and dependable performances both at low and high volume. With a standard 4-series built, the low power version (45 mA) is perfect for a portable gas detector while the standard version fits smaller detection heads and compact detectors.IRNET-P 20mm detects CO2 or hydrocarbon gases such as propane and methane in LEL range. The 0-100%Vol range version features N.E.T. DYNAMIC technology for the highest sensing accuracy ever seen in a compact sensor. DYNAMIC sensors also provide an optional digital output for Propane detection over 0-2.1% Vol range – the best option to detect different hydrocarbons using a cross-reference factor. DYNAMIC sensors are suited for instrument manufacturers that want to design Methane and Propane detectors in compliance with the Chinese Mine standard.All N.E.T. IR sensors run on a microprocessor-based platform for internal signal processing, providing a linearized and temperature compensated output in digital and analogue format – the ideal solution for instrument manufacturers, even without any specialist knowledge in IR technology.Advantages of our IRNET-P 20mm NDIR sensors:• ATEX or IECEx certified, for use in classified areas• SIL2 rated, for certified dependability (fail-safe detection)• Individual calibration and testing, for measurements you can trust• Extended temperature range (-40 to +60 °C), for use in any environment• Internal microprocessor, for advanced signal processing• Standard industrial size, to fit existing detectors• Fast T90 response time, for critical and life-saving applications• ModBus or P2P digital communication, for ease of integration• Solid, rugged construction with stainless steel enclosure• Signal versatility: voltage and optional bridge or pellistor output• Patented, longer optical path for better resolution and stability• Standard industrial accepted negative or positive pinout

DS3709 – IREF-32 –Ethylene (C2H4) 乙烯

Wed, 21 Jul 2021 13:14:37 +0800

N.E.T. IREF-32 – Ethylene 乙烯C2H4N.E.T. IREF is market’s most DEPENDABLE refrigerant gas sensor. Design your own fail-safe leak detection systems with state-of-the-art NDIR (Non Dispersive InfraRed) technology. Lower your total cost of ownership and stand out from your competition with better accuracy, selectivity and reliability.N.E.T. IREF sensors have the market’s most comprehensive range of targeted gases, allowing detection in ppm and LEL range of HFCs, HFOs and SF6 (for CO2 and Propane, please check IRNET page). You can easily expand your range, as all sensors have the same built and interface.N.E.T. IREF implements N.E.T. advanced NDIR, black body and microprocessor technology to eclipse classic semiconductor (MOS) sensor performances, reducing maintenance costs (guaranteed 1-year calibration span), increasing sensor lifetime and making your leak detection fail-safe, while offering the best gas selectivity available and a fast response time.N.E.T. sensors are EN 50271 & SIL2 (TUV) approved and they are designed to fit into fixed gas monitors compliant with all the relevant refrigerant standards, along with portable electronic leak detectors.All N.E.T. IR sensors run on a microprocessor-based platform for internal signal processing, providing a linearized and temperature compensated output in digital and analogue format – the ideal solution for instrument manufacturers, even without any specialist knowledge in IR technology. Advantages of our IREF NDIR sensors:• SIL2 rated, for certified dependability (fail-safe detection)• Standard industrial 7-series size, to fit existing detectors• 1-year calibration span, to reduce maintenance costs• MTBF of more than 5 years, for greater sensor lifetime• The most comprehensive range of targeted gases on the market• Extended temperature range (-40 to +60 °C), for use in any environment• Fast T90 response time and superior selectivity, for critical and life-saving applications• ModBus or analogue output, for ease of integration• Internal microprocessor, for advanced signal processing• Solid, rugged construction with stainless steel enclosure• Patented, longer optical path for better resolution and stability

GSS CO2 Sensor傳感器

Wed, 14 Dec 2022 11:30:27 +0800

GSS 固態NDIR的二氧化碳傳感器所有GSS CO2傳感器均使用內部LED和光電二極管。感測器的回應速度快，便於實際的測量。通過板上的電位器調整輸出精度。具有良好的重複性﹐與長時間的穩定性﹐並且反應時間短﹐也兼具耐用的性能。它通常被用來作為家庭和工廠的氣體洩漏監測設備﹐

SP 100 EC-BLp 3 Vdc

Tue, 26 Oct 2021 11:49:26 +0800

Customisation :We offer your customized precision pump without additional costs - even for small batchesOur modular concept allows easy adaptions ,Outstanding quality - Made in Germany ,Excellent technical consultation and service by experts , More than 40 years experience in pump applications ,Manifold mounting ,Fast delivery - order your sample now!Application Examples Particularly suitable for portable devices such as:Air samplingGas snifferBreath gas analysisGas monitoringPersonal gas detectorsExhaust analyzersPneumaticsPipetting devices Fuel cellsProduct FeaturesMicro diaphragm pump for gasesApplicable as vacuum or pressure pumpFCV technology (fast closing valves)Available in common supply voltagesFrom low-cost to durable brushless drivesLow weight and very small sizeApplicable for noise- and vibration-sensitive environments (i.e.hospitals, personal protectionequipment, etc.)Installation in any mountingorientation allows simple device integrationLeak-tight, oil-free and mainte-nance-free

Mulberry_CO2

Fri, 16 Dec 2022 13:52:11 +0800

Key features4-Series form factor, for drop-in replacementUltra-low power consumption:

DS3638 CYBER 4-20mA OUTPUT

Fri, 23 Jul 2021 09:42:50 +0800

CYBER TRANSMITTERSCYBER is a microprocessor driven PCB designed to accomodate a range of gas sensing devices, greatly simplifying the use of gas sensors by general remote sensor monitoring systems and specialist gas detection systems alike. The device can drive and process the signals from the majority of N.E.T.’s industrial sensor range and may be configured for other sensor combinations on request.CYBER 4-20mA OUTPUTThe main features of CYBER 4-20mA OUTPUT are:32 mm diameterMulti board module4-20mA and digital (RS85 Modbus Protocol) outputs.Compatible with all 4 and 7-series EC, pellistors and NDIRSupplied complete with sensor configured and pre-calibratedSpecial range supplied on requestLocal Threshold alarm outputsWatchdog and local fault outputsSimple calibration in the field

GSS CO2 sensor evaluation kits

Tue, 04 Aug 2020 19:28:31 +0800

GSS CO2傳感器評估套件可讓您快速將我們的傳感器進行測試，從而幫助您做出明智的開發決策。您可以獲得實時讀數，從而可以評估與產品的兼容性並測試概念驗證。您可以在PC上查看傳感器的測量值，也可以將讀數下載到Excel文件中進行分析。無需開發任何代碼，只需即插即用即可進行即時演示。傳感器評估套件可用於GSS標準CO2傳感器。它涵蓋了我們的CozIR®，ExplorIR®和SprintIR®系列中的8個傳感器。CozIR Evaluation Kit Product FlyerSprintIR Evaluation Kit Product FlyerExplorIR Evaluation Kit Product FlyerEvaluation Kit User GuideEvaluation Kit Software Download

ESRF-ESF Sensor

Fri, 10 Mar 2023 16:33:21 +0800

Key AttributesCalibration GasAir, other available on requestFlow RangeUp to ±300 ln/min Bi or UnidirectionalSupply Voltage5 VOutputI2C, SPI, 0.5 – 4.5 VTotal Error±1.25 % RDEffective Resolution12 bitResponse Time35 msPressure Drop

LuminOx O2 Flow ( LOX-02-F )

Thu, 06 Aug 2020 15:48:12 +0800

LuminOx密封式光學氧氣傳感器系列為用戶提供了僅在傳感器正面測量樣氣的應用需求。LuminOx密封式光學氧氣傳感器是由SST開發和製造的，屬於LuminOx系列的一部分，LuminOx系列是一系列工廠校準的氧氣傳感器，它們使用發光猝滅原理測量環境氧氣含量。LuminOx密封式光學氧氣傳感器（LOX-02-S）是LuminOx氧氣傳感器標準範圍的擴展。

ESCP-BMS1 Sensor

Fri, 10 Mar 2023 16:33:15 +0800

Key AttributesPressure Type Absolute, Gauge, DifferentialPressure Range, Absolute200mbara … 10baraPressure Range, Gauge0barg … 11bargPressure Range, Differential±10mbar … ±1barPower Supply3.3VCurrent Consumption, full operation< 1mAAccuracy±0.15% FSSTotal Error Band±0.25% FSSOperating Temperature-20C … +85CCompensation Temperature0C … +60C, -20C … +85CDigital OutputCalibrated Pressure & TemperatureAnalog OutputCalibrated PressureOverpressure ToleranceUp to 100xMedia CompatibilityGasesDescriptionES Systems has developed a series of board mountable pressure sensors targeting a variety of markets requiring high resolution and accuracy for gas pressure measurements. The ESCP-BMS1 is a silicon capacitive pressure sensor with state-of-the-art performance and exceptional quality. The MEMS pressure sensor die is underpinned by ES’ innovative SOI-surface micromachining technology.ESCP-BMS1 is an absolute, gauge or differential pressure sensor of ultra-high resolution with analog (0-3,3V), SPI or I2C interface. The output is fully calibrated, and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. The sensor is ready to be installed directly to the end system without further processing with medical, HVAC, industrial, commercial & automotive applications. The total error including repeatability, hysteresis, non-linearity, thermal offset and calibration error between 0°C and 60°C is better than 0.25% FS.Different power modes are available enabling low power operation. The sensor can be configured to provide both high accuracy 32-bit pressure and temperature outputs.ESCP-BMS1 is a silicon capacitive pressure sensor with excellent long-term stability. The sensor is incorporated in a standard 8-pin DIP package with a single or two pneumatic ports. The top port is the high side and the bottom port is the low side.Advantages – Based on silicon capacitive technology– Exceptional accuracy– Long-term stability– High overpressure tolerance– Low powerIndustrial Applications ESCP-BMS1 is designed but not limited for usage on the following industrial applications: Air Flow Measurement, Air Compressors, Air Movement Control, Actuators, Analytical Instruments, Automated Pneumatic Assembly Equipment, Chemical Analysis Controllers, Factory Automation, Fire Suppression System, Flow Calibrators Gas Chromatography, Gas Flow Instrumentation, Gaseous Leak Detection, Industrial Controls, Industrial Gas Supply, Industrial Pneumatic Devices, Leak Detection, Modulated Furnace Controls, Oxygen Concentrators, Panel Meters, Pressure Switching, Pressure Valves, Process Control Pumps, Remote Monitoring Devices, Robotics, Valves, Vacuum Pump Monitoring and Variable Air Volume (VAV).Medical Applications ESCP-BMS1 pressure sensor is designed but not limited for usage on the following medical applications: Anesthesia Equipment, Breathalyzers, CPAP Equipment, Drug Dosing Equipment, Hospital Beds, Hospital Gas Supply, Hospital Room Air Pressure, Massage Machines, Medical Instrumentation, Nebulizers, Patient Monitoring Equipment, Respiratory Equipment, Sleep Apnea Equipment, Spirometers, Ventilators and Wound Therapy.HVAC Applications ESCP-BMS1 is designed but not limited for usage on the following HVAC applications: Airflow Monitoring, Clogged Filter Detection, Duct Air Flow, Environmental Control Systems, Filter Monitoring, Blocked Filter Detection and Indoor Air Quality.

NEO974I(0-5 Vol.-% H2)

Tue, 25 Jun 2024 15:38:29 +0800

Typical applications are e.g. the detection of hydrogen in industrial plants under atmospheric or inert conditions and also under condensing conditions.The most important properties:Measuring range H2: 0 to 5 % by volume in air (LEL)Tolerance ± 0,3 % by volume H2Temperature measuring range: -40 to 85 °CPressure range: 0.6 - 5 bar absoluteAir humidity: 0 to 100 % r.h. (not condensing)Response time: t90 < 3 sRecovery time: t10 < 3 sSignal output via 0-10V or 4-20 mA

NEO983I(0-10 Vol.-% H2)

Tue, 25 Jun 2024 15:38:29 +0800

Typical applications are, for example, the detection of hydrogen in the fuel cell exhaust of automobiles or the determination of hydrogen concentrations under atmospheric conditions and also in oxygen-depleted airThe most important features:Measuring range from 0 to 10 vol% H2Temperature measuring range: -40 to 85 °CPressure range: 0.6 - 5 bar absoluteError controlSignal output via 0-10V DAC or 4-20 mAReplacement system for the AMS HLS-440PGas adapter available as screw-in version or for measuring gas in a tube

DS3387 NT-SO2-PL20 Sulfur Dioxide 二氧化硫

Thu, 22 Jul 2021 11:13:49 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-SO2-PL20 is a new electrochemical gas sensorwith 3 electrodes for the detection of Sulphur Dioxide in a variety of gas detection applications. Exhibiting high performance with very stable base line and output signal and excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage. This new Premium Line design offers several advantages with respect to the traditional industrial sensor. For example it gives the possibility to use a general OP amplifier instead of the high-cost OP97.Detection Ranges :Range: 0-20 ppm500 nA/ppm -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

H2 Oxi-cat NEO324 10 kW

Tue, 25 Jun 2024 15:38:29 +0800

The NEO324 is a "smaller version" of the NEO 342, e.g. to be able to burn (waste) hydrogen flamelessly and emission-free, in a wide concentration range and to use the heat energy. Or you can purify helium from hydrogen or electrolysis gases. Other air-gas mixtures can also be burnt.Our NEO324 catalyst has a diameter of 66 mm. Typical applications of our catalysts:Catalytic, flameless, thermal combustion of H2/air gas mixtures forheat generation and/or waste gas purification on an industrial scaleFine purification of gases by removing minimal impuritiesCombustion of hydrocarbon gas mixtures (at elevated starting temperature)Catalytic post-combustion of fuel cell waste gases or electrolysis gasRemoval of oxygen or hydrogen residues from electrolysis gas, e.g. purification of air or heliumDepletion of oxygen or hydrogen in chemical processesSafety engineering, explosion prevention, fire prevention (through O2 depletion)max. H2-flow: 3,5 m³/hthermal power: 10 kWgastemperature at 4 Vol.-% H2: 330°C With a click on "Request" we can advise you without obligation and send you a tailor-made offer.Further technical details about the NEO324 can be found in the "Data sheet".

NEO1002A-Battery monitoring

Tue, 25 Jun 2024 15:38:29 +0800

H2 sensor system for Li-ion battery monitoring for automotive applications.Lithium-ion cells can pose great dangers if mechanical damage, water ingress, overcharging or deep discharge (see bottom of page) cause flammable gases to escape and, in the worst case, lead to a fire or explosion.Our new NEO1002 sensor system detects directly in the battery/high-voltage storage HVS both the hydrogen concentration, reducing and oxidising gases, the gas pressure (pressure increase in case of gas leakage), water leakage and also the battery temperature ("thermal runaway" or thermal runaway).Most important properties:Measuring range: 0-2 vol.% H2 (½ LEL)Carrier gases AirMeasurement signal independent of ambient temperature and pressureDetection of "thermal runaway", pressure increase and reducing gases in a battery/accumulatorTemperature measuring range: -40 to 85 °CPressure range: 0.6 - 2 bar absoluteHumidity: 0 - 90 % r.h. (non-condensing)Response time: t90 < 3 sRecovery time: t10 < 3 sSignal: CAN 2.0 A/B with 250/500 kbpsYou can download technical information by clicking on "Data sheet". Or select "Enquiry" and contact us without obligation. If Li-ion cells are overcharged or exposed to high temperatures, the layer structure of the metal oxides breaks down. During this process - which is highly exothermic, i.e. high amounts of energy are released - elemental oxygen is formed. The high thermal energy leads to evaporation of the organic electrolyte liquid, producing highly combustible gases. If the temperature in the cell exceeds the flash point of a gas, then this organic gas ignites and the Li-ion cell burns. As this is a self-reinforcing process, it can lead to thermal runaway and ignite the stored Li atoms (metal fire).Deep discharging a Li-ion cell can also lead to a fire. Again, the electrolyte liquid decomposes and forms easily combustible gas. Copper ions go into solution from the copper sheet, which is used as a discharge material on the anode side. If such a deeply discharged Li-ion cell is charged, the amount of energy supplied can no longer be stored in chemical energy due to the lack of electrolyte liquid. The charging energy is converted into heat. In addition, the dissolved copper ions deposit as copper needles on the graphite (anode). They can pierce the separator foil and cause a short circuit.If the current density is too high and the leads melt, reducing and oxidising gases are also produced and can be detected.

Cranberry_CH4

Fri, 16 Dec 2022 13:52:16 +0800

Key featuresNew 1-series ultra-compact form factor0 - 5% volume measurement rangeNo False alarms due to environmental transientsNo poisoningFail SafeFast response time, T90

GSS ExplorIR®-W (CozIR-WX)

Tue, 12 May 2020 16:26:57 +0800

GSS ExplorIR®-W (CozIR-WX)是低功率，高性能CO2傳感器能夠測量高達20％的CO2水平。它適用於在閉環採樣應用或便攜式採樣儀器中的電池操作中測量高濃度的CO2。ExplorIR®-W是一種靈活的寬範圍低功率CO2感測器，具有可選的溫度和濕度感應以及可選的模擬輸出。ExplorIR®-W基於紅外LED技術和創新的光學設計.特徵 : ExplorIR®-W是一款體積小的低功耗CO2感測器，專為空間有限的應用而設計。小尺寸，低功耗和高精度相結合，使該感測器適用於可擕式，電池供電的個人安全設備。ExplorIR®-W具有非常寬的動態範圍，能夠測量高達100％的CO2氣體濃度，而不會影響測量精度或回應速度。ExplorIR®-W使用獲得專利的NDIR固態LED光學技術，可在感測器的整個使用壽命內提供一致且準確的CO2測量性能。高信賴度0-20％二氧化碳測量，耐用，低功耗，電池供電系統或惡劣，惡劣環境的理想選擇I2C介面，易於安裝，預先校準且可立即使用。每秒2個讀數高達100％的CO2測量範圍溫度，相對濕度和類比輸出選項70ppm典型精度ExplorIR®-W是一種靈活的寬範圍低功率CO2感測器，具有可選的溫度和濕度感應以及可選的模擬輸出。CO2 Range : 0-5%0-20%0-60%0-100%

DS3687 – IRNET-P-20 – CO2 Low range

Wed, 21 Jul 2021 12:25:47 +0800

DS4657 – IREF-32 – SF6 六氟化硫(冷媒)

Wed, 21 Jul 2021 12:51:53 +0800

N.E.T. IREF – market’s most DEPENDABLE SF6 and refrigerant gas sensorN.E.T. IREF is market’s most DEPENDABLE refrigerant gas sensor. Design your own fail-safe leak detection systems with state-of-the-art NDIR (Non Dispersive InfraRed) technology. Lower your total cost of ownership and stand out from your competition with better accuracy, selectivity and reliability.N.E.T. IREF sensors have the market’s most comprehensive range of targeted gases, allowing detection in ppm and LEL range of HFCs, HFOs and SF6 (for CO2 and Propane, please check IRNET page). You can easily expand your range, as all sensors have the same built and interface.N.E.T. IREF implements N.E.T. advanced NDIR, black body and microprocessor technology to eclipse classic semiconductor (MOS) sensor performances, reducing maintenance costs (guaranteed 1-year calibration span), increasing sensor lifetime and making your leak detection fail-safe, while offering the best gas selectivity available and a fast response time.N.E.T. sensors are EN 50271 & SIL2 (TUV) approved and they are designed to fit into fixed gas monitors compliant with all the relevant refrigerant standards, along with portable electronic leak detectors.All N.E.T. IR sensors run on a microprocessor-based platform for internal signal processing, providing a linearized and temperature compensated output in digital and analogue format – the ideal solution for instrument manufacturers, even without any specialist knowledge in IR technology. Advantages of our IREF NDIR sensors:• SIL2 rated, for certified dependability (fail-safe detection)• Standard industrial 7-series size, to fit existing detectors• 1-year calibration span, to reduce maintenance costs• MTBF of more than 5 years, for greater sensor lifetime• The most comprehensive range of targeted gases on the market• Extended temperature range (-40 to +60 °C), for use in any environment• Fast T90 response time and superior selectivity, for critical and life-saving applications• ModBus or analogue output, for ease of integration• Internal microprocessor, for advanced signal processing• Solid, rugged construction with stainless steel enclosure• Patented, longer optical path for better resolution and stability

LuminOx O2 Sensors

Thu, 06 Aug 2020 15:27:38 +0800

LuminOx密封式光學氧氣傳感器系列為用戶提供了僅在傳感器正面測量樣氣的應用需求。LuminOx密封式光學氧氣傳感器是由英國公司開發和製造的，屬於LuminOx系列的一部分，LuminOx系列是一系列工廠校準的氧氣傳感器，它們使用發光猝滅原理測量環境氧氣含量。LuminOx密封式光學氧氣傳感器（LOX-02-S）是LuminOx氧氣傳感器標準範圍的擴展。 Barometric pressure range :LOX-01 100—1400mbarLOX-02 500—1200mbar

DS3694 – IRNEX-P-20 – CO2 High range

Thu, 22 Jul 2021 16:01:05 +0800

Mulberry_CH4

Fri, 16 Dec 2022 13:52:09 +0800

Key features4-Series form factor, for drop-in replacementUltra-low power consumption:

DS3637 CYBER TTL VOLTAGE OUTPUT

Fri, 23 Jul 2021 09:37:11 +0800

CYBER TRANSMITTERSCYBER is a microprocessor driven PCB designed to accomodate a range of gas sensing devices, greatly simplifying the use of gas sensors by general remote sensor monitoring systems and specialist gas detection systems alike. The device can drive and process the signals from the majority of N.E.T.’s industrial sensor range and may be configured for other sensor combinations on request.CYBER TTL VOLTAGE OUTPUTThe main features of CYBER TTL VOLTAGE OUTPUT are:32 mm diameterSingle board 0.8-4V analogue outputMODBUS protocol on TTL levelCompatible with all 4 and 7-series EC and pellistorsSupplied complete with sensor configured and pre-calibratedSpecial range supplied on requestLocal Threshold alarm outputsWatchdog and local fault outputsSimple calibration in the field

GSS CozIR®-A 低功耗

Tue, 12 May 2020 16:27:08 +0800

GSS CozIR®-A CO2傳感器被設計用來監測二氧化碳含量室內。它是監視建築物、學校、辦公室或任何對室內人員舒適度至關重要的室內空氣中CO2的理想選擇。CozIR®-A是世界領先的低功耗CO2二氧化碳監測器，使其非常適用於電池供電的系統，包括IoT應用程序和智能技術。這意味著便攜式，可穿戴甚至是自供電的監控系統和解決方案現在僅需3.3 v就可用於您的應用。該傳感器專為測量低水平的CO2而設計，提供可選的溫度和濕度感應以及可選的模擬（電壓）輸出。該傳感器易於使用，因為它通過一個簡單的UART接口進行通信。CozIR®-A建立在我們獨特的專利LED技術平台和光學設計上。這項固態技術可實現一流的功耗，使用壽命和耐用性。Co2 Range :0-2000 ppm0-5000 ppm0-1％特徵 : 低功耗 ,每秒2次測量 ,I2C介面。

GSS SprintIR®-6S

Wed, 20 May 2020 14:14:55 +0800

GSS SprintIR®-6S每秒可讀取20個讀數，因此非常適合高速感應要求以及測量快速變化的CO2水平。SprintIR®-6S可測量高達100％的CO2濃度，並配有流通式適配器。該傳感器易於使用，因為它通過簡單的UART接口進行通信。通過緊湊的設計，6S可以輕鬆集成到測量和檢測系統中。其低功耗要求也使其非常適合電池供電的系統，包括便攜式，可穿戴和自供電應用，因為它僅需3.3 v。SprintIR®-6S建立在我們獨特的專利LED技術平台和光學設計上。這項固態技術可實現一流的速度，功耗和耐用性。*基於每分鐘0.1升的流量和CO2濃度的0-10％階躍變化。CO2 Range : 0-5%0-20%0-60%0-100%

ESRF-HF Transmitter

Fri, 10 Mar 2023 16:33:18 +0800

Key AttributesCalibration GasAir, other available on requestFlow RangeUp to 1500 ln/min , UnidirectionalSupply Voltage14 V to 32 VOutput4-20 mAAccuracy± 2 % m.v. + 0.3 % F.S.Resolution12 bitOutput Update Rate10 HzDuty Pressure11 barOperating Temperature– 40 °C … + 85 °CCalibration Temperature0 °C … + 50 °CHumidity0 % – 95 % RH Non-CondensingSize ( Ø x L)35 x 56 mmPneumatic InterfaceØ20, Ø25, Ø32Electrical InterfaceCableDescriptionES Systems has developed ESRF-HF, a family of insertion gas flow transmitters, based on the hot-film anemometer principle for mass gas flow measurements.The ESRF-HF is a family of mass flow transmitters which enable fast and accurate measurements of gas flow over a wide dynamic range. Each transmitter integrates a MEMS flow sensor and readout electronics inside a housing with very small form factor made from stainless steel. The duty pressure of the flow transmitter is 11bar. All measurement data are fully calibrated, and temperature compensated on board, leading to a reduced temperature coefficient and high measurement accuracy.The standard system provides analog signal output, with excellent repeatability and hysteresis combined with good resolution. Calibration gas is air, but other non-aggressive gases can be also available upon request.The compact size of the ESRF-HF flow transmitters combined with the ruggedized stainless-steel housing makes them ideal for use in industrial applications within confined spaces. For easier handling and mounting, a series of in-line pipe adaptors (Ø20, Ø25, Ø32) is also available upon request.

SP 270 EC-BLp 12 Vdc

Tue, 08 Jun 2021 22:54:13 +0800

ESCP-MIS1 Sensor

Fri, 10 Mar 2023 16:33:12 +0800

Key AttributesPressure Type AbsolutePressure Range Up to 350barPower Supply+3.1 to 5.5VCurrent Consumption, full operation< 2.3mATotal Error< ±0.25%FSOperating Temperature-40C … +125CCompensation Temperature0C … +60C, -20C … +85C, -40C … +125CDigital OutputCalibrated Pressure & TemperatureAnalog OutputCalibrated PressureOutputI2C, SPI, Analog 0.5 to 2.5VOverpressure ToleranceUp to 100xMedia CompatibilityGases, LiquidsMaterial OptionsSS 316L, Hastelloy, TitaniumDescriptionES Systems has developed a series of medium isolated pressure sensors suitable for applications with harsh environmental conditions where resistance to corrosive fluids or gases is required. Each sensor integrates a MEMS capacitive pressure sensor die, and a CMOS ASIC for the signal conditioning. The MEMS pressure sensor dies are underpinned by ES Systems’ innovative microfabrication process for silicon capacitive sensors.The capacitive pressure sensor dies integrated into the medium isolated pressure systems provide state-of-the-art accuracy and resolution, excellent long-term stability combined with very good repeatability and hysteresis. The total overall error, including thermal offsets, is lower than ±0.25% FS.The ESCP-MIS1 is a family of pressure sensors in the standard Ø19 stainless steel 316L capsule. In this type of sensors, the pressure is transferred hydraulically to the hermetically sealed sensing element through the oil used to fill the cavity between the sensing element and the stainless steel diaphragm. The pressure capsule interface is either I2C, SPI or analog. The sensors are provided calibrated and compensated at various temperatures and pressure ranges from 10 bara to 350 bara. Custom materials like Hastelloy or Titanium are available upon request.Advantages – Based on silicon capacitive technology– Exceptional accuracy– High overpressure tolerance– Low powerIndustrial & Aerospace Applications This medium isolated pressure sensor is designed but not limited to usage on the following applications: Gas and liquid pressure measurement, Corrosive Fluids and Gas Measurement Systems, Sealed Systems, Manifold Pressure Measurement, Submersible Depth Monitoring, Medical Instruments, Industrial process control, Pressure Calibrator, Pressure Transmitter Integration, Refrigeration Equipment & Air conditioner, OEM equipment.

GSS-LED-PD-CO2

Wed, 26 May 2021 10:53:33 +0800

GSS-LED-CO2-1 & GSS-PD-CO2-1High Efficiency LED and Photo-Diode for CO2 detectionDESCRIPTIONThe GSS LED and Photo-Diode pair are specially designed devices for emitting and detecting mid-infrared light.The LED gets a 4.25μm peak emission wavelength. The photo-diode is the companion detector component designed to match the LED.The LED and photo-diode have been optimised for usage in CO2 detection system.LED FEATURES• High efficiency• High output power• Long lifetimePHOTO-DIODE FEATURES• Fast response time• High radiant sensitivity• Long lifetimeAPPLICATIONS• CO2 gas detection

NEO986I(0-100 Vol.-% H2)

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen measuring system in oxygen-free/inert environment with temperature, pressure and air humidity compensated signal evaluation. Typical application is e.g. the use in the anode circuit of PEM fuel cells to determine a tertiary mixture of hydrogen, nitrogen and water vapour or to determine hydrogen concentrations under inert conditions.Most important characteristics:Measuring range H2: 0 to 100 vol.%Tolerance ± 2 % by volume H2Temperature measuring range: -40 to 85 °CPressure range: 0.6 to 5 bar absoluteAir humidity: 0 to 100 % r.h. (non condensing)Response time: t90 < 5 s Recovery time: t10 < 5 sSignal output via 0-10V DAC or 4-20 mA

GSS ExplorIR®-M (MinIR)

Tue, 12 May 2020 16:26:53 +0800

GSS ExplorIR®-M（以前稱為MinIR）是一種微型的高濃度、低功耗、二氧化碳傳感器。高信賴度的設計使其易於集成到氣體監測和檢測系統中。可在惡劣的環境下可靠地測量二氧化碳濃度，濃度最高可達100％。這包括暴露於不同程度壓力和高振動條件的應用。其低功耗要求也使其非常適合電池供電的系統，包括便攜式，可穿戴和自供電應用，因為它僅需3.3 v。UART接口進行通信。ExplorIR®-M建立在我們獨特的專利LED技術平台和光學設計的基礎上。這種固態二氧化碳監測技術可實現一流的功耗，使用壽命和耐用性。每秒2個讀數最小的二氧化碳感測器體積高達100％的CO2測量範圍70ppm典型精度這款小巧的緊湊型感測器可可靠地測量寬範圍的CO2水準。適用於惡劣，快速變化的環境和不穩定的條件。 [endif]測量高達100％的CO2濃度 [endif]低功率CO2感測器 [endif]固態LED/PD光學技術 [endif]耐振動和衝擊 [endif]UART資料介面內置自動校準CO2 Range : 0-5%0-20%0-60%0-100%

DS2436 NT-CL2-PL10 Chlorine 氯

Thu, 22 Jul 2021 11:08:16 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-CL2-PL10 is a new electrochemical gas sensor with 3 electrodes for the detection of Chlo-rine in a variety of gas detection applications. Ex-hibiting high performance with long-term stability,this compact (20.4 mm diameter) sensor is suita-ble both for portable and fixed gas detection in-struments. The porous electrode technology enables accu-rate gas detection with high sensitivity. The e-chanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leak-age.Detection Ranges :Range: 0-100 ppm700 nA/ppm -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

GSS CozIR®-Blink 低功耗

Tue, 12 May 2020 16:27:01 +0800

GSS 的CozIR®-BlinkCO2傳感器是我們迄今為止功耗最低的CO2傳感器，也是市場上功耗最低的NDIR CO2傳感器！這款超低功耗二氧化碳傳感器在英國設計和製造，使用戶可以根據自己的需求和應用來管理功耗。閃爍模式是產品名稱背後的靈感，它使用戶可以自定義每次測量所消耗的能量，從而完全控制超低功耗應用的能量折衷。傳感器可以打開以記錄讀數，然後在不使用時完全關閉電源。這不是睡眠模式–傳感器在此階段不使用任何電源。它具有世界領先的低功耗特性，因此僅需3.3 V電壓，因此非常適用於電池供電的系統，包括IoT應用程序和智能技術。使用我們的計算器可以根據您的預期使用量來計算功耗。CozIR®-Blink是我們的CozIR®系列CO2傳感器的一部分，這些傳感器專為低濃度二氧化碳環境而設計。我們提供0-2000ppm，0-5000ppm和0-1％的測量範圍。該傳感器易於使用，並具有I2C和UART接口，為客戶提供了選擇。CozIR®-Blink在我們的客戶中已經是非常受歡迎的傳感器。我們已經看到該傳感器的應用已經成功應用於包括供暖，通風和空調（HVAC），環境監測，按需控制的通風（DCV）和室內空氣質量（IAQ）。CO2 Range : 0-2000ppm0-5000ppm0-1%

H2 Oxi-cat NEO342 25 kW

Tue, 25 Jun 2024 15:38:29 +0800

Also with the H2-OxiCat NEO342 you can burn e.g. (waste) hydrogen flameless and emission-free in a wide concentration range and use the heat energy. Or you can purify helium from hydrogen or electrolysis gases. Other air-gas mixtures can also be burned.Our catalyst NEO342 has a diameter of 110 mm and can therefore process more volume flow.Typical application:Catalytic, flameless, thermal combustion of H2/air gas mixtures for heat recovery and/or exhaust gas purification on an industrial scaleFine purification of gases by removing minimal impuritiesCombustion of hydrocarbon-gas mixtures (at elevated starting temperature)Catalytic afterburning of fuel cell exhaust gases or electrolysis gasRemoval of oxygen or hydrogen residues from electrolysis gas, e.g. purification of air or heliumDepletion of oxygen or hydrogen in chemical processesSafety engineering, explosion prevention, fire prevention (through O2 removal)Can be used as a "passive flare", alternative to thermal afterburning (TNV)Production of CO2-neutral process heatmax. H2-flow: 8,5 m³/hthermal power: 25 kWgastemperature at 4 Vol.-% H2: 330°C With a click on "Request" we can advise you without obligation and send you a tailor-made offer. For further technical details on the NEO342, please refer to the "Data sheet" at the top.

NEO952A-Exhaust gas monitoring

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen sensing system for automotive applications to monitor exhaust gases up to 5% H2 by volume at exhaust temperatures up to 400°C.Our hydrogen sensing system can quickly and accurately measure hydrogen in the exhaust gas of hydrogen combustion engines. The measured values are output temperature-compensated via CAN-Bus 2.0A/B. Most important properties:H2 sensitivity: 0 - 5 vol.-% H2Tolerance: ± 0.5 vol.-% H2Temperature range: -40 to 400 °CPressure range: 0.8 to 1.2 bar absoluteHumidity: 0 to 100 % r.h. (non-condensing)Response time: t90 < 10 sRecovery time: t10 < 10 sSignal: CAN 2.0 A/B with 250/500 kbpsYou can download technical information by clicking on "Data sheet". Or select "Enquiry" and contact us without obligation.

Cranberry_R32

Fri, 16 Dec 2022 13:52:14 +0800

Key featuresNew 1-Series ultra-compact form factorUltra-low power consumption:

DS4657 – IRNET-P-32 – Refrigerants 冷媒

Wed, 21 Jul 2021 11:57:23 +0800

RNET-P 32mm is N.E.T. best selling IR sensor. Its longer optical path provides better resolution, stability, humidity drift and cross sensitivity, resulting in overall stronger specifications when compared to smaller 20mm versions (find out why).IRNET-P 32mm superior performances, reliability and versatility makes it the best solution available for integration in a fixed gas detector for CO2 or for hydrocarbon gases such as propane and methane in LEL range.All N.E.T. IR sensors run on a microprocessor-based platform for internal signal processing, providing a linearized and temperature compensated output in digital and analogue format – the ideal solution for instrument manufacturers, even without any specialist knowledge in IR technologyAdvantages of our IRNET-P 32mm NDIR sensors:• SIL2 rated, for certified dependability (fail-safe detection)• Individual calibration and testing, for measurements you can trust• Extended temperature range (-40 to +60 °C), for use in any environment• Internal microprocessor, for advanced signal processing• Standard industrial size, to fit existing detectors• Fast T90 response time, for critical and life-saving applications• ModBus or P2P digital communication, for ease of integration• Solid, rugged construction with stainless steel enclosure• Signal versatility: voltage and optional bridge or pellistor output• Patented, longer optical path for better resolution and stability• Standard industrial accepted negative or positive pinout

DS3688 – IRNET-P-20 – CO2 High range

Wed, 21 Jul 2021 12:23:19 +0800

DS3693–IRNEX-P - CO2 Low range

Thu, 22 Jul 2021 15:58:26 +0800

O2 sensor evaluation kits

Thu, 06 Aug 2020 15:48:22 +0800

LOX-EVB LuminOx評估接口板旨在使客戶以最少的工作量或設計工作即可快速輕鬆地評估Sensor的光學氧氣傳感器範圍。LOX-EVB使客戶能夠輕鬆測試LuminOx傳感器。該接口同時提供三個輸出。 RS232（串行接口電壓電平）； RS485（Modbus RTU）端口允許多個。FEATURESAllows quick and easy evaluation of the LuminOx sensor with minimum effort and / or design workInterface mounted screw terminals for easy wiringThe interface simultaneously provides three outputs: RS232 (serial interface voltage levels) , RS485 (Modbus RTU) port allows multiple sensors to be addressed on a bus , 0—5V analogue output for basic measurements of oxygen onlyConverts the LuminOx TTL level RS232 output into three standard industrial outputsAuto detects ppO2 or O2% variants of LuminOx sensor

GSS SprintIR®-W

Wed, 20 May 2020 14:23:53 +0800

GSS SprintIR®-W是高速CO2傳感器。這款二氧化碳監測儀每秒可讀取20個讀數，因此非常適合高速感應要求以及測量快速變化的CO2水平。SprintIR®-W能夠測量高達100％的CO2濃度，並帶有通過適配器的可選流量。該傳感器易於使用，因為它通過簡單的UART接口進行通信。其低功耗要求也使其非常適合電池供電的系統，包括便攜式，可穿戴和自供電應用，因為它僅需3.3 v。SprintIR®-W建立在我們獨特的專利LED技術平台和光學設計上。這項固態技術可實現一流的速度，功耗和耐用性。CO2 Range : 0-5% 0-20%0-60%0-100%

ESPP-MIT1 Transmitter

Fri, 10 Mar 2023 16:33:09 +0800

Key AttributesPressure TypeGaugePressure RangeUp to 1000barPower Supply+8V … +28VTotal Error

Product Finder

Tue, 05 Sep 2023 13:29:56 +0800

這裡可以幫助您快速的找到你需要的產品.https://www.schwarzer.com/en/products/product-finder

NEO974M(0-5 Vol.-% H2)

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen measuring system in atmospheric air with temperature, pressure and humidity compensated signal evaluation and output via Modbus RS485/RTU. Typical applications are e.g. the detection of hydrogen for room monitoring and determination of hydrogen concentrations under atmospheric conditions.Most important features:Measuring range H2: 0 to 5 vol% H2Temperature measuring range: -40 - 85 °CPressure range: 0.6 - 5 bar absoluteHumidity: 0-100 % r.h. (non-condensing)Response time: t90 < 3 sRecovery time: t10 < 3 sAccuracy: ± 0.3 vol% H2 Signal: Signal output via RS485 (Modbus RTU) protocol Gas adapter available as screw-in version or for measuring gas in a tube

DS2963 NT-NO2-PL10 Nitrogen Dioxide 二氧化氮

Thu, 22 Jul 2021 10:59:35 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-NO2-PL10 is a new electrochemical gas sensor with 3 electrodes for detection of Nitrogen Dioxide (NO2) in a variety of gas detection applications. Exhibiting high per-formance with long-term stability, this com-pact sensor (20.4 mm diameter) is suitable for both portable and fixed gas detection instruments. The NT-NO2-PL30 is particu-larly suitable for use in fixed monitoring systems measuring NO2 levels in under-ground car parks, where long term reliabil-ity and low cost are essential requirements. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure preventsDetection Ranges :Range: 0-10 ppm600 nA/ppm -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

H2 Oxi-cat NEO361 50 kW

Tue, 25 Jun 2024 15:38:29 +0800

Also with the H2-OxiCat NEO361 you can burn e.g. (waste) hydrogen flameless and emission-free in a wide concentration range and use the heat energy. Or you can purify helium from hydrogen or electrolysis gases. Other air-gas mixtures can also be burned.Our catalyst NEO342 has a diameter of 110 mm and can therefore process more volume flow.Typical application:Catalytic, flameless, thermal combustion of H2/air gas mixtures for heat recovery and/or exhaust gas purification on an industrial scaleFine purification of gases by removing minimal impuritiesCombustion of hydrocarbon-gas mixtures (at elevated starting temperature)Catalytic afterburning of fuel cell exhaust gases or electrolysis gasRemoval of oxygen or hydrogen residues from electrolysis gas, e.g. purification of air or heliumDepletion of oxygen or hydrogen in chemical processesSafety engineering, explosion prevention, fire prevention (through O2 removal)Can be used as a "passive flare", alternative to thermal afterburning (TNV)Production of CO2-neutral process heatDeOxy-catmax. H2-flow: 17 m³/hthermal power: 50 kWgastemperature at 4 Vol.-% H2: 330°C With a click on "Request" we can advise you without obligation and send you a tailor-made offer. For further technical details on the NEO342, please refer to the "Data sheet" at the top.

NEO974A-Leakage detection

Tue, 25 Jun 2024 15:38:29 +0800

H2-sensor system for leakage detection for automotive applications up to 5% by volume H2 in air.Typical applications are e.g. the detection of hydrogen in the cabin of automobiles, determination of hydrogen concentrations under atmospheric conditions and also under condensing conditions.Most important properties:Measuring range H2: 0 to 5 vol.-%Tolerance ± 0.3 vol.-% H2Temperature measuring range: -40 to 85 °CPressure range: 0,6 bis 5 bar absolut absoluteHumidity: 0 to 100 % r.h. (non-condensing)Response time: t90 < 3 sRecovery time: t10 < 3 sSignal: CAN 2.0 A/BReplacement for AMS HLS-442You will receive technical information for downloading by clicking on "Data sheet" or select "Request" and contact us without obligation.You can see the different installation options as follows:

DS3708 – IRNET-P-32 – CO2 二氣化碳

Wed, 21 Jul 2021 11:44:43 +0800

DS3685 – IRNET-P-20 – Methane (CH4) 甲烷 Low range

Wed, 21 Jul 2021 12:19:35 +0800

DS3695–IRNEX-P Methane (CH4) 甲烷 High range

Thu, 22 Jul 2021 15:44:37 +0800

GSS CozIR@-LP 低功耗

Wed, 20 May 2020 14:07:30 +0800

GSS CozIR®-LP 是一個超低功率，低輪廓周圍的空氣的CO2感測器。它可以使用緊湊型電池運行，從而無需使用更大的電池和超級電容器。這代表了同類最佳競爭CO2感測器的一半功耗。高度不到8毫米，比CozIR®-A環境感測器小85％，相當於節省了40％的空間。CozIR®-LP，現在有一個新的低功耗同系列 CozIR®-LP2 5000ppm的CO2感測器，以及與CozIR®-Blink特徵 : 超低功耗具有專利鍍金光學器件的LED NDIR感測器預期壽命> 15年CO2 Range : 0-2000ppm0-5000ppm0-1%

GSS SprintIR®-R

Tue, 12 May 2020 16:27:06 +0800

GSS 新型SprintIR®-R CO2傳感器是一種極其快速且精確的傳感器，其響應速度比SprintIR-6S®快2.5倍，SprintIR®-R是當今可用的響應最快的NDIR CO2傳感器*。。所述SprintIR®-R CO2傳感器，採用50個讀數每秒，這使得它適合於許多工業和需要高速需求的應用和快速變化的CO2水平。該傳感器還可以測量高達100％的CO2濃度，並配有一個流通適配器。該傳感器的尺寸可以輕鬆利用，並集成到檢測和氣體測量系統中。它還可用於許多電池供電的系統，便攜式手持設備和可穿戴式3.3V供電應用中。SprintIR®-R建立在我們獨特的LED技術平台和光學設計專利上。這項固態LED技術可實現一流的速度、功耗和耐用性。特徵:測量高達100％的CO2濃度,高速感應和快速響應（50hz),低功耗-35mW,符合RoHS與Wifi，藍牙，SigFox，ZigBee和EnOcean等無線物聯網網絡集成,數位(UART)輸出,是醫療保健，食品包裝，運輸，科學，低功耗和電池應用的理想選擇。* 基於每分鐘0.1升的流量和二氧化碳濃度0-10％的階段變化*CO2 Range : 0-5%0-20%0-60%0-100%

DS2963 NT-NO2-PL30 Nitrogen Dioxide 二氧化氮

Thu, 22 Jul 2021 10:54:47 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-NO2-PL30 is a new electrochemical gas sensor with 3 electrodes for detection of Nitrogen Dioxide (NO2) in a variety of gas detection applications. Exhibiting high per-formance with long-term stability, this com-pact sensor (20.4 mm diameter) is suitable for both portable and fixed gas detection instruments. The NT-NO2-PL30 is particu-larly suitable for use in fixed monitoring systems measuring NO2 levels in under-ground car parks, where long term reliabil-ity and low cost are essential requirements. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure preventsDetection Ranges :Range: 0-30 ppm600 nA/ppm -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

NEO983M(0-10 Vol.-% H2)

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen measuring system in oxygen-free and oxygen-depleted air with temperature, pressure and humidity compensated signal evaluation and output via Modbus RS485 (Modbus RTU). Typical applications are e.g. the detection of hydrogen in fuel cell exhaust gas and the determination of hydrogen concentrations in oxygen-depleted air.Most important features:Measuring range H2: 0 to 10 vol% H2Temperature measuring range: -40 - 85 °CPressure range: 0.6 to 5 bar absoluteHumidity: 0-100 % r.h. (non-condensing)Response time: t90 < 3 sRecovery time: t10 < 3 sSignal: Signal output via RS485 (Modbus RTU) protocolGas adapter available as screw-in version or for measuring gas in a tube

NEO983A-Exhaust sensor

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen sensor system for automotive applications for monitoring exhaust gases up to 10 vol.-% H2 of fuel cell powered vehicles.The hydrogen measuring system can measure hydrogen very fast and precise in air as well as in oxygen-depleted air. It can be used, for example, in cathode exhaust air monitoring. The measured values are transmitted temperature-, pressure- and humidity compensated via CAN bus.Most important properties:H2 sensitivity: 0 - 10 vol.-% H2Tolerance: ± 0.3 vol.-% H2 Temperature measuring range: -40 to 85 °CPressure range: 0.6 to 5 bar absoluteHumidity: 0 to 100 % r.h. (non-condensing)Response time: t90 < 3 sRecovery time: t10 < 3 sSignal: CAN 2.0 A/B with 250/500 kbpsReplacement for AMS HLS-440Papplicable for cathode exhaust air monitoringYou can download technical information by clicking on "Data sheet" or select "Request" and contact us without obligation.You can see the different installation options as follows:

DS3706 – IRNET-P-32 – Methane 甲烷(CH4)

Wed, 21 Jul 2021 11:23:25 +0800

DS3689 – IRNET-P-20 – Methane (CH4) 甲烷 High range

Wed, 21 Jul 2021 12:11:30 +0800

DS3691–IRNEX-P Methane (CH4) 甲烷 Low range

Thu, 22 Jul 2021 15:38:58 +0800

GSS CozIR@-LP2 低功耗

Wed, 20 May 2020 13:57:22 +0800

GSS CozIR®-LP2 5000ppm的CO2傳感器上低功耗這使得它很容易集成到電池供電的系統，包括智能技術的設備和應用程序的IoT。微型超輕型CozIR@-LP2圍繞測量低水平的二氧化碳而設計，可用於許多氣體監測和檢測系統。特徵 : 測量高達1％的CO2濃度,固態，沒有活動部件，沒有加熱的燈絲。耐振動和衝擊，不會產生熱,UART和I2C 輸出。功耗比典型的NDIR CO2傳感器低多達50倍。體積小巧，便於儀表集成,壽命長，維護成本低。無線，便攜式，可穿戴和自供電系統的理想選擇。支持節能的智能家居環境,輕鬆集成到IAQ、HVAC、農業、MAP、汽車、航空航太和安全等應用中。CO2 Range : 0-2000ppm0-5000ppm0-1%

DS3386 NT-NH3-PL5000 Ammonia

Thu, 22 Jul 2021 10:45:25 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-NH3-PL5000 is a new 3-electrode electrochemical gas sensor for the detection of Ammonia in a variety of gas detection applications. Exhibiting high performance with very stable base line and output signal and excellent selectivity, this compact sensor (20.4 mm Ø) is suitable both for portable and fixed gas detection instruments. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage.NET Premium Line design offers several advantages with respect to traditional industrial sensors. For example it gives the possibility to use a general OP amplifier instead of the high-cost OP97. Also, it shows much greater resistance and quicker recovery when exposed to ammonia, and almost no interference with H2S.Detection Ranges :Range: 0-5000 ppm8 nA/ppmFor very high concentration measurements -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

NEO986M(0-100 Vol.-% H2)

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen measuring system in oxygen-free/inert environment with temperature, pressure and air humidity compensated signal evaluation. Typical application is e.g. the use in the anode circuit of PEM fuel cells to determine a tertiary mixture of hydrogen, nitrogen and water vapour or to determine hydrogen concentrations under inert conditionsMost important features:Measuring range H2: 0 to 100 vol%Tolerance ± 2 % by volume H2Temperature measuring range: -40 to 85 °CPressure range: 0.6 to 5 bar absoluteHumidity: 0 to 100% r.h. (non-condensing)Response time: t90 < 5 sRecovery time: t10 < 5 sSignal output via Modbus RTU via RS485

NEO986A-Anode-Gas

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen measuring system in oxygen-free/inert environment with temperature, pressure and air humidity compensated signal evaluation for automotive applications.Typical application is e.g. the detection of hydrogen in automotive supply lines or the use in the anode circuit of PEM fuel cells to determine a tertiary mixture of hydrogen, nitrogen and water vapour.Most important properties:Measuring range H2: 0 to 100 vol.%Tolerance ± 2 % by volume H2Temperature measuring range: -40 to 85 °CPressure range: 0.6 to 5 bar absoluteHumidity: 0 to 100 % r.h. (non-condensing)Response time: t90 < 5 sRecovery time: t10 < 5 sSignal: CAN 2.0 A/B with 250/500 kbpsWith a click on "Request" we can advise you without obligation. For further information please refer to the technical data sheet.This system is also available as hydrogen measuring system in air or oxygen-depleted air.

DS3707 – IRNET-P-32 – Propane (C3H8) 丙烷

Wed, 21 Jul 2021 11:19:45 +0800

GSS CozIR@-LP3 低功耗

Thu, 08 Oct 2020 11:21:05 +0800

GSS CozIR®-LP3 CO2傳感器採用專有的固態LED技術，可實現無與倫比的低功耗，使其適用於包括電池供電和無線連接設備在內的各種應用。CozIR®-LP3為用戶提供了廣泛的靈活性，可以選擇UART或I²C控制接口，數字和模擬CO2測量以及故障安全數字警報水平監視器。CozIR®-LP3包括板載電源管理，允許用戶在測量期間和傳感器處於非活動狀態時控制傳感器的功耗。用戶可以在不開啟傳感器的情況下將有功電流消耗降低至

DS3074 NT-NT-NH3-PL1000 Ammonia

Thu, 22 Jul 2021 10:33:34 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-NH3-PL1000 is a new 3-electrode electrochemical gas sensor for the detection of Ammonia in a variety of gas detection applications. Exhibiting high performance with very stable base line and output signal and excellent selectivity, this compact sensor (20.4 mm Ø) is suitable both for portable and fixed gas detection instruments. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage.NET Premium Line design offers several advantages with respect to traditional industrial sensors. For example it gives the possibility to use a general OP amplifier instead of the high-cost OP97. Also, it shows much greater resistance and quicker recovery when exposed to ammonia, and almost no interference with H2S.Detection Ranges :Range: 0-1000 ppm8 nA/ppmFor high concentrations measurements -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

NEO986HT(High temperature to 120°C)

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen measuring system in oxygen-free and oxygen-depleted air with temperature, pressure and humidity compensated signal evaluation and output via Modbus RS485 (Modbus RTU) under extreme conditions.Typical applications are e.g. the determination of hydrogen concentrations under inert conditions or the use in the anode circuit of PEM fuel cells to determine a tertiary mixture of hydrogen, nitrogen and water vapourMost important features:Measuring range H2: 0-100 vol.%Temperature measuring range: -40 - 120 °CPressure range: up to 5 bar absoluteHumidity: 0-100 % r.h. (non-condensing)Response time: t90 < 5 sRecovery time: t10 < 5 sSignal output via RS485 (Modbus RTU) protocol, 4-20 mA or 0-10VGas adapter available as screw-in version or for measuring gas in a tubeAlos possible with ATEX Zone I

NEO986HT up to 120°C

Tue, 25 Jun 2024 15:38:29 +0800

Hydrogen sensor system for automotive applications for monitoring up to 100 vol% H2 in oxygen-free/inert environment with temperature, pressure and air humidity compensated signal evaluation for automotive applications under extreme conditions.The hydrogen measuring system works very quickly and precisely, e.g. in the anode gas of a fuel cell. The measured values are compensated for temperature, pressure and air humidity via the CAN bus.Most important features:H2 sensitivity: 0 - 100 vol.% H2Tolerance: < ± 2 vol% H2 Temperature measuring range: -40 to 120 °CPressure range: up to 6 bar absoluteHumidity: 0 to 100 % r.h. (non-condensing)Response time: t90 < 5 sRecovery time: t10 < 5 sSignal: CAN 2.0 A/B with 125/250/500/1000 kbpsapplicable in the anode loop of a fuel cellAlso possible with ATEX Zone ITechnical information for download can be obtained by clicking on "data sheet". With a click on "Request" we can advise you without obligation.This system is also available as hydrogen measuring system in air or oxygen-depleted air.See the different mounting options here:

DS3385 NT-NH3-PL300 Ammonia

Thu, 22 Jul 2021 10:21:00 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-NH3-PL300 is a new 3-electrode electrochemical gas sensor for the detection of Ammonia in a variety of gas detection applications. Exhibiting high performance with very stable base line and output signal and excellent selectivity, this compact sensor (20.4 mm Ø) is suitable both for portable and fixed gas detection instruments. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage.NET Premium Line design offers several advantages with respect to traditional industrial sensors. For example it gives the possibility to use a general OP amplifier instead of the high-cost OP97. Also, it shows much greater resistance and quicker recovery when exposed to ammonia, and almost no interference with H2S.Detection Ranges :Range: 0-300 ppm40 nA/ppmOperating in Long time NH3-H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

DS2694 NT-NH3-PL100 Ammonia

Thu, 22 Jul 2021 09:48:36 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-NH3-PL100 is a new 3-electrode electrochemical gas sensor for the detection of Ammonia in a variety of gas detection applications. Exhibiting high performance with very stable base line and output signal and excellent selectivity, this compact sensor (20.4 mm Ø) is suitable both for portable and fixed gas detection instruments. The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage.NET Premium Line design offers several advantages with respect to traditional industrial sensors. For example it gives the possibility to use a general OP amplifier instead of the high-cost OP97. Also, it shows much greater resistance and quicker recovery when exposed to ammonia, and almost no interference with H2S.Detection RangesRange: 0-100 ppm100 nA/ppm High Sensitivity – Fast reponse-H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

DS3479 NT-H2S-PL20-HT Hydrogen Sulfide 硫化氫—High Temperature

Wed, 21 Jul 2021 15:54:23 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-H2S-PL20-HT is a Premium Line elec-trochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide especially devel-oped to endure high temperature conditions, such as desert environments. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instru-ments.The porous electrode technology enables accu-rate gas detection with high sensitivity. The me-chanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakageDetection Ranges:Range 0-20 ppm1500 nA/ppmTemperature range: -40°C +65°C. -H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

DS3479 NT-H2S-PL100-HT Hydrogen Sulfide—High Temperature

Wed, 21 Jul 2021 15:35:21 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-H2S-PL100-HT is a Premium Line elec-trochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide especially devel-oped to endure high temperature conditions, such as desert environments. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instru-ments.The porous electrode technology enables accu-rate gas detection with high sensitivity. The me-chanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakageDetection Ranges :Range: 0-100ppm700± 150 nA/ppm-H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage

DS3076 NT-H2S-PL100 Hydrogen Sulfide (H2S) 硫化氫

Wed, 21 Jul 2021 15:18:07 +0800

Electrochemical Cells – a complete line of Electrochemical cell sensors for toxic and flammable gas detection from the world’s best manufacturersN.E.T. PREMIUM LINE is manufactured in Japan exclusively for N.E.T. and under our exact specifications, to comply with performance requirements of EN 45544-2 – including upper and lower limit of measurement, deviation of the measured values in clean air and in standard test gas, deviation of the measured values at all temperatures, pressures and at any humidity, time of response (t90, t50), time of recovery (t10, t50), over-range and stability.The line includes sensors for Carbon Monoxide (CO), Nitric oxide (NO), Nitrogen dioxide (NO2), Hydrogen sulfide (H2S), Sulfur dioxide (SO2), Hydrogen chloride (HCl), Chlorine (Cl2), Ethylene (C2H4), Formaldehyde (CH2O), Hydrogen Peroxide (H2O2), Ammonia (NH3, available in 4 different ranges) and the new H2S-HT cell for high temperatures.The NT-H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage.The NT-H2S-PL100 is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage00 is a new Premium Line electrochemical gas sensor withlectrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode is a new Premium Line electrochemical gas sensor with 3 electrodes for the detection of Hydrogen Sulfide in a variety of gas detection applications. Exhibiting high performance with excellent selectivity, this compact sensor (20.4 mm diameter) is suitable both for portable and fixed gas detection instruments.The porous electrode technology enables accurate gas detection with high sensitivity. The mechanical design of the sensor gives optimum gas diffusion characteristics, and the hermetically sealed enclosure prevents costly electrolyte leakage